Sterling STC GA CNC Twin-Column Automatic Mitre Bandsaw
Sterling’s range of bandsaws are one of the leading brands in the metal cutting world. The Sterling STC GA CNC twin column, automatic, mitre bandsaw being no exception. This a fully automatic machine in a twin-column design ideally suited for cutting solid material, as well as pipes, profiles and beams in steel cutting, with mitring capacities.
The Siemens PLC controller on this saw enables the user to set-up a programme with 10 steps for automatic cutting, simply punch in your lengths and quantities, and let the saw do the work for you.
| MODEL | STC325 GA CNC | STC360 GA CNC | STC540 GA CNC | ||||||||||
| Capacity | 0° | 30° | 45° | 60° | 0° | 30° | 45° | 60° | 0° | 30° | 45° | 60° | |
| ◯ Round | mm | 325 | 325 | 300 | 200 | 360 | 360 | 360 | 325 | 540 | 540 | 510 | 270 |
| □ Flat | mm | 315 | 315 | 300 | 200 | 360 | 360 | 360 | 290 | 540 | 540 | 450 | 250 |
| ▭ Square | mm | 400 x 315 | 380 x 315 | 300 x 315 | 200 x 315 | 610 x 360 | 590 x 360 | 450 x 360 | 280 x 360 | 670 x 540 | 600 x 540 | 450 x 540 | 250 x 540 |
| Bed Height | 655 | 735 | 845 | ||||||||||
| Main Drive Motor | kW | 2.2 | 3 | 4 | |||||||||
| Hydraulic Motor | kW | 1.1 | 1.1 | 2.2 | |||||||||
| Cutting Speeds | m/min. | 20 – 100 | |||||||||||
| Band Dimensions | mm | 5000 x 34 x 1.1 | 4800 x 34 x 1.1 | 5200 x 41 x1.3 | |||||||||
| Tolerances | mm | 0.3 | |||||||||||
| PLC Controller | Siemens | ||||||||||||
| Program | 1 Program with 10 Steps | ||||||||||||
| Stroke Length | mm | 500 | |||||||||||
| Remnant Piece (Scrap Length) | mm | 255 (Automatic Mode) 50 (Manual Mode) |
280 (Automatic Mode) 60 (Manual Mode) |
310 (Automatic Mode) 60 (Manual Mode) |
|||||||||
| Max. Feeding | mm | 6000 | |||||||||||
| Length | mm | 2,130 | 2,850 | 3,100 | |||||||||
| Width | mm | 2,150 | 2,250 | 2,350 | |||||||||
| Height | mm | 1,650 | 1,870 | 2,150 | |||||||||
| Weight | kg | 1,860 | 2,400 | 3,800 | |||||||||
| Operation | Automatic | ||||||||||||
| Vice | Hydraulic | ||||||||||||
| Vice Feed | Hydraulic | ||||||||||||
Features
- Twin column rigidity
- Fully automatic NC
- Up to 60° Mitre
- Hydraulic clamping of mitre angle
- Hydromechanical Blade Tension
- Inverter drive providing infinitely variable blade speed
- Automatic bow return
- Hydraulic vice
- Hydraulic feeding vice
- Hydraulic rear vice
- Optical height adjustment
- Heavy duty gear box
- PLC control panel
- Sensitive cutting pressure regulation
- Swarf brush
- Carbide blade guides
- Flood Coolant system
Options
- Hydraulic blade tension
- Hydraulic top clamps
- Chip conveyor
- Spray mist lubrication
- Laser cutting line
- Hexagonal Vice for bundle cutting
- Roller track and measuring systems
Sterling’s range of bandsaws are one of the leading brands in the metal cutting world. The Sterling STC GA CNC twin column, automatic, mitre bandsaw being no exception. This a fully automatic machine in a twin-column design ideally suited for cutting solid material, as well as pipes, profiles and beams in steel cutting, with mitring capacities.
The Siemens PLC controller on this saw enables the user to set-up a programme with 10 steps for automatic cutting, simply punch in your lengths and quantities, and let the saw do the work for you.
A built-in flood coolant system helps to not only prolong blade life, but assists with a cleaner cut, preventing overheating and warping of blades. The hydraulic gravity down feed allows you complete control of the speed of the cut, ensuring the drop of the blade suits to the material that you are cutting, with the automatic stop, the blade will stop spinning once the cut is complete, allowing for safer worker interaction.
Ideal for cutting round, square or rectangular section, bandsaws like this Sterling STC GA CNC are the mainstay of virtually any fabrication shop in the UK. We offer a wide range of Sterling and Bianco Bandsaws, to fit with your cutting requirements, look at the rest of the range here.
We can also supply blades and coolant too, these can be purchased directly off our tooling website. All of our Saws are supplied with a starter set of our Goldcut Blades, we will discuss with you the material you will be cutting to ensure they will meet your requirements and a free container of coolant, so your new saw is ready to begin cutting straight away as soon as it’s delivered to you!
How to use the gravity down feed on a Bianco saw
30th September 2021
Benefits of the Bianco Bandsaw 420MS
21st July 2017
How to fold, coil, unfold and flip a bandsaw blade FAQ
10th March 2017
How to use the Sterling SRA 440 DGSA Control Panel
21st October 2016
How to Recalibrate the SRA440 DGSA Bandsaw Bow Mitre Digital Readout
21st October 2016
Achieve the best results with the Goldcut Bandsaw Blades
21st October 2016
6IX Process Design Ltd uprate their machinery with Selmach
14th September 2022
6IX Process Design Ltd, based in Somerset, are manufactures of stainless steel tanks, vessels and processing systems for the brewing and dairy industries. We spoke to Sam Cabell, Managing Director.. More
MR Industrial Services continued success with the help of Selmach Machinery
6th September 2022
MR Industrial Services, based in Corby, Northamptonshire supply a range of architectural and industrial steelwork to the construction industry. We spoke to Carl Peters, Martyn Nimmo and William Adams to.. More
Ridgesteel brings profiling in house to boost their capacity and productivity
23rd November 2021
We spoke to Ryan Ridgewell, General Manager of Ridgesteel and the Black Country Engineering Group about the High Definition Ajan 260amp CNC Plasma Cutting Machine and Sterling 360 DGSAE Bandsaw.. More
“You can never have enough bandsaws” says Channa Engineering Ltd
13th June 2021
Channa Engineering is a family run business based in Essex. They specialise in all metal works, designing and create custom gates, grills, railings, balustrades & much more. We spoke to.. More
Warwick Steel Structures share their thoughts on our service
7th August 2017
Warwick Steel Structures have purchased several machines from Selmach in the past including bandsaws and guillotines, so when they wanted to replace their cutting machine, they got in touch. We.. More